ELEK software which is hardware dongle protected requires a special USB dongle to function.
The hardware dongle must be inserted into the USB port of the PC which you would like to use the software.
Install the software onto any number of PC's. You'll need to move the USB dongle to the PC you want to use.
Note if you remove the dongle from the PC while in use then after a short period of time the software will lock. Re-insert the dongle to keep using the software.
If the dongle doesn't work (an LED light should operate on the USB dongle) then you may need to download and install the latest drivers from the dongle manufacturer. If this is the case you can contact us for assistance.